Cole-Parmer MP-100 Stuart Analogue Melting Point Apparatus 230 VAC

Cole-Parmer MP-100 Stuart Analogue Melting Point Apparatus 230 VAC

E1009429

Product code: E1009429

Direct Delivery – up to 14 weeks.
-
+

The SMP11 is ideal for use in education, easy to use, with no complicated programming. Monitor samples through the magnifying lens and read the temperature on the included spirit-filled thermometer, see the sample more clearly with the integrated LED lamp.

The spirit filled mercury free thermometer, does not pose a health hazard in the event of a breakage.

The easy to follow instructions are printed directly on the apparatus.

The SMP 11 allows you to take the melting point of up to 3 samples at once for greater efficiency. The samples are placed in a melting point capillary tube and then inserted into the Aluminium block. The heating rate can be manually set between 1 and 20°C per minute, up to a maximum of 250°C.

  • The apparatus is supplied with open ended capillary tubes, one end should be sealed using a Bunsen Burner, before use.
  • Easy to operate
  • Good visualisation
  • GCSE to A-Level Chemistry: Melting Point investigations
  • A high-range thermometer should be used with the melting point apparatus as the temperature exceeds the temperature range of a standard laboratory spirit thermometer.
  •  Lowering the heating rate as you near the expected melting point temperature will increase the accuracy of the reading. 

Further Information

Age Recommended from
11 Years
Brand
Cole-Parmer
Stuart
Heating Rate
1 - 20ºC
Number of samples
3
Temperature Range
50 - 250ºC

Documents

-
+
Direct Delivery – up to 14 weeks.

The SMP11 is ideal for use in education, easy to use, with no complicated programming. Monitor samples through the magnifying lens and read the temperature on the included spirit-filled thermometer, see the sample more clearly with the integrated LED lamp.

The spirit filled mercury free thermometer, does not pose a health hazard in the event of a breakage.

The easy to follow instructions are printed directly on the apparatus.

The SMP 11 allows you to take the melting point of up to 3 samples at once for greater efficiency. The samples are placed in a melting point capillary tube and then inserted into the Aluminium block. The heating rate can be manually set between 1 and 20°C per minute, up to a maximum of 250°C.

  • The apparatus is supplied with open ended capillary tubes, one end should be sealed using a Bunsen Burner, before use.
  • Easy to operate
  • Good visualisation
  • GCSE to A-Level Chemistry: Melting Point investigations
  • A high-range thermometer should be used with the melting point apparatus as the temperature exceeds the temperature range of a standard laboratory spirit thermometer.
  •  Lowering the heating rate as you near the expected melting point temperature will increase the accuracy of the reading. 

Further Information

Age Recommended from
11 Years
Brand
Cole-Parmer
Stuart
Heating Rate
1 - 20ºC
Number of samples
3
Temperature Range
50 - 250ºC

Documents

You May Also Like

Shopping from Overseas?

We have detected that your IP address is not UK based.

We have a specific international website which deals with all non-UK transactions and deliveries. Please select which website you would like to continue with.

For International Delivery

Findel Education family logos Switch to Findel International

For Delivery in the UK

Brand logo